DX3 Differential 2P 63A 30mA Class AC

The Legrand DX³ 411506 residual current circuit breaker is designed to detect earth leakage currents and disconnect the circuit when they reach the set threshold. It features 2 poles, a rated current of 63 amperes, 30 milliamperes sensitivity, and type AC technology for detecting sinusoidal alternating residual currents.

With a rated voltage of 230 volts AC, a compact format of just 2 modules, and DIN rail mounting, this DX³ RCD is suitable for electrical panels where high-rated residual current protection is required in single-phase circuits.

Legrand DX³ bipolar 63-amp residual current device

Reference 411506 belongs to Legrand's DX³ range of residual current circuit breakers. Its 2-pole configuration allows the simultaneous disconnection of the circuit conductors when the device detects a residual current above the set value.

Its rated current of 63 amperes determines the current that can flow through the RCD under normal operating conditions, always respecting the installation conditions and overcurrent protection defined for the circuit.

30-milliamp sensitivity

The Legrand 411506 features a rated residual current of 30 milliamperes. The device continuously compares the current flowing through the live conductors and trips the circuit when it detects an imbalance corresponding to an earth leakage above the specified threshold.

This sensitivity is used as additional residual current protection against the risk associated with electric shock and leakage currents, within the conditions established by the applicable installation regulations.

Type AC residual current device

This model belongs to class AC. Residual current devices of this type are intended to detect sinusoidal alternating residual currents.

The choice of residual current device type should be made taking into account the loads connected to the circuit. For installations with electronic equipment capable of generating other forms of residual current, type A, F, B or other specific technologies may be required.

230-volt rated voltage

The residual current device is designed for a rated voltage of 230 volts AC and a frequency of 50 hertz.

Its rated insulation voltage is 250 volts and the rated impulse withstand voltage reaches 4 kilovolts.

10-kiloamp short-circuit withstand rating

Legrand specifies a 10-kiloamp Icw short-circuit withstand rating for reference 411506. It also indicates an impulse withstand capacity of 0.25 kiloamperes.

It is important to note that this product is a residual current circuit breaker and does not include magnetothermal protection against overloads and short circuits. It must be installed together with the appropriate overcurrent protection devices for the circuit.

Residual current protection for people and installations

The residual current device is designed to detect insulation faults that cause current to flow to earth. When the leakage exceeds its rated sensitivity, the mechanism opens the circuit to interrupt the supply.

In addition to helping protect against the risk of electric shock, the detection of persistent leakage currents helps limit risks arising from insulation faults in the installation.

Compact 2-module format

The Legrand DX³ 411506 occupies a width equivalent to 2 modules, making it easy to integrate into electrical panels alongside miniature circuit breakers, contactors and other modular devices.

It is designed for DIN rail mounting and has an installation depth of 44 millimeters.

Legrand 411506 dimensions

• Width: 35.6 millimeters.
• Height: 94.8 millimeters.
• Depth: 77.8 millimeters.
• Installation depth: 44 millimeters.
• Number of modules: 2.

These dimensions make it possible to accurately plan the space required inside the distribution board.

Screw terminals for large cross-section wiring

The residual current device includes screw connection terminals and accepts both cable and compatible busbar systems.

The connection capacities specified by Legrand are:

• Flexible or stranded conductors: between 0.75 and 35 square millimeters.
• Rigid conductors: between 0.75 and 50 square millimeters.

This terminal capacity makes it easy to integrate into installations with high currents and different conductor cross-sections.

Top or bottom supply

Reference 411506 allows power supply from the top or bottom, providing flexibility during panel design and wiring.

The device supports connection by cable and compatible busbar, making it easy to combine with other modular components in the Legrand range.

IP20 and IK04 protection

The residual current device offers an IP20 protection rating once wired according to the manufacturer's conditions.

Its mechanical impact resistance is IK04, while the front face provides protection against direct contact suitable for use in properly installed electrical panels.

Wide operating temperature range

The Legrand 411506 is designed to operate in ambient temperatures between -25 and 60 degrees Celsius.

For storage, the manufacturer specifies a range between -40 and 70 degrees Celsius. The product has a pollution degree 2.

Compatible with DX³ auxiliary devices

Legrand indicates that this residual current circuit breaker can be combined with compatible auxiliary devices from the DX³ range, expanding the possibilities for control, signaling or actuation according to the needs of the electrical panel.

It also includes a front identification space, making it easier to label the protected circuit and carry out subsequent inspection or maintenance operations.

Complies with IEC/EN 61008-1

The Legrand DX³ 411506 residual current circuit breaker is developed in accordance with IEC/EN 61008-1, applicable to residual current-operated circuit breakers without integral overcurrent protection.

This feature confirms that its function is specifically residual current protection and that it must be coordinated with the corresponding magnetothermal protection of the installation.

Legrand 411506 technical specifications

• Brand: Legrand.
• Range: DX³.
• Reference: 411506.
• EAN: 3245064115063.
• Product type: residual current circuit breaker.
• Residual current type: AC.
• Number of poles: 2.
• Rated current: 63 amperes.
• Residual current sensitivity: 30 milliamperes.
• Rated voltage: 230 volts AC.
• Frequency: 50 hertz.
• Icw short-circuit withstand rating: 10 kiloamperes.
• Impulse current withstand: 0.25 kiloamperes.
• Rated insulation voltage: 250 volts.
• Rated impulse withstand voltage: 4 kilovolts.
• Selective protection: no.
• Short-time delay: no.
• Integrated magnetothermal protection: no.
• Mounting: DIN rail.
• Number of modules: 2.
• Installation depth: 44 millimeters.
• Width: 35.6 millimeters.
• Height: 94.8 millimeters.
• Depth: 77.8 millimeters.
• Protection rating: IP20.
• Impact resistance: IK04.
• Pollution degree: 2.
• Cross-section for flexible or stranded conductor: between 0.75 and 35 square millimeters.
• Cross-section for rigid conductor: between 0.75 and 50 square millimeters.
• Connection type: screw terminal, cable and busbar.
• Supply direction: top or bottom.
• Operating temperature: between -25 and 60 degrees Celsius.
• Storage temperature: between -40 and 70 degrees Celsius.
• Color: RAL 7035 grey.
• Compatible with auxiliary devices: yes.
• Standard: IEC/EN 61008-1.

63-amp bipolar residual current device for electrical panels

The Legrand DX³ 411506 combines a rated current of 63 amperes, 30-milliamp sensitivity and AC residual current detection in a compact 2-module format.

Its DIN rail mounting, 10-kiloamp Icw short-circuit withstand rating, wide connection range and compatibility with DX³ auxiliary devices make it easy to integrate into electrical panels that require bipolar residual current protection at 230 volts.