PrismaSeT P Armor Width650+150.Depth 600.Height 2m

The Schneider Electric PrismaSeT P LVS08607 framework is a structure designed for the construction of low-voltage distribution switchboards in the PrismaSeT P range. It is configured for a 650 + 150 mm wide cubicle, equivalent to a total width of 800 mm, with 600 mm depth and 2000 mm height, providing a robust and modular base for mounting compatible electrical components and distribution systems.

Its design allows several cubicles to be combined side by side or back to back, making it easier to create larger switchboards adapted to the needs of each installation. The compartment intended for the busbar can be positioned on either the left or the right side, offering flexibility in the internal layout of the switchboard.

Main features of the Schneider Electric LVS08607

• Brand: Schneider Electric.
• Range: PrismaSeT.
• Series: PrismaSeT P.
• Reference: LVS08607.
• Type: framework or cubicle structure.
• Cubicle configuration: 650 + 150 mm.
• Total width: 800 mm.
• Height: 2000 mm.
• Depth: 600 mm.
• Weight: 34.36 kg.
• Color: white RAL 9003.
• Finish: textured matte.
• Surface treatment: electrophoresis and hot-cured epoxy-polyester powder coating.
• Compatibility: Schneider Electric PrismaSeT P cubicles.
• Combined installation: side by side or back to back.
• Busbar compartment: can be installed on the left or right.
• Compatible cover panels: IP30 or IP55 configurations.
• Standard: IEC 62208.
• Reinforced structure seismic resistance: 2G according to IEC 60068-2-57.

Structure for PrismaSeT P switchboards

The LVS08607 is part of Schneider Electric's PrismaSeT P system, a modular architecture designed for distribution switchboards. The framework is the main mechanical structure on which panels, doors, plates, supports, busbars, protection devices and other accessories required to configure the complete switchboard are subsequently installed.

As part of a modular system, it allows the different enclosure and internal equipment components to be selected according to the project, while maintaining compatibility between the PrismaSeT P elements specified by Schneider Electric.

650 + 150 mm configuration

The framework is designed for a 650 + 150 mm configuration. This corresponds to a main section of 650 mm and an additional 150 mm compartment, resulting in a total external width of 800 mm.

This layout is especially useful in switchboards where the main equipment area needs to be separated from the space intended for busbars, cabling or other distribution elements.

Busbar compartment on the left or right

Schneider Electric specifies that the busbar compartment can be positioned on either the left or the right side of the structure. This option makes it possible to adapt the switchboard architecture to cable entry, equipment arrangement and the configuration of other associated PrismaSeT P columns.

The position should be chosen during switchboard design, taking into account busbar distribution, electrical connections and the accessories planned.

Dimensions of 2000 x 800 x 600 mm

The structure has dimensions suitable for building large-format distribution switchboards:

• Height: 2000 mm.
• Total width: 800 mm.
• Width distribution: 650 + 150 mm.
• Depth: 600 mm.
• Product weight: 34.36 kg.

These dimensions correspond to the structural framework and must be considered together with the panels, doors, base plinths and other accessories that form part of the finished enclosure.

Possibility of combining multiple frameworks

The LVS08607 can be combined with other compatible structures side by side, allowing the creation of multi-column switchboards for installations with a high number of devices or circuits.

It also supports a back-to-back configuration, expanding design possibilities in installations where access or equipment is required on both sides.

This modularity makes it possible to adapt the switchboard to electrical projects of different sizes without having to resort to a custom-made special enclosure.

Prepared for IP30 or IP55 configurations

The structure can be fitted with cover panels compatible with IP30 or IP55 configurations. The final protection rating is not provided by the framework alone, but by the complete assembly made up of the structure, doors, panels, gaskets and correctly selected and installed accessories.

In this way, the same frame can be used in switchboards with different protection requirements against contact, dust and water, depending on the enclosure components selected.

White RAL 9003 finish

Schneider Electric supplies the framework in white RAL 9003. The surface has a textured matte finish, characteristic of PrismaSeT range components.

The uniform finish makes it easier to achieve an aesthetic match with doors, side panels and other compatible external elements from the same family.

Protective surface treatment

The structure receives an electrophoresis treatment followed by a layer of hot-cured epoxy-polyester powder coating. This treatment is designed to provide protection for the metal structure and a durable finish for use inside electrical switchboards.

The final resistance of the assembly to environmental conditions will also depend on the panels, doors, gaskets and other components used to complete the enclosure.

Included components

Schneider Electric's technical sheet specifies that the framework assembly includes the structural elements required for installation:

• Two frames.
• Four crosspieces.
• Fixing elements for assembly.
• Side-by-side association kit.

These components make it possible to form the basic cubicle structure. Doors, closing panels, base plinths, plates, supports and electrical components are selected separately according to the required configuration.

Designed for modular assembly

The PrismaSeT P structure is designed to facilitate modular switchboard construction. The frames and crosspieces are assembled using the fixing elements provided by Schneider Electric, creating a rigid structure on which accessories and equipment are subsequently installed.

The manufacturer's assembly documentation specifies the fixing points and tightening torques that must be respected during assembly to ensure the correct mechanical configuration of the assembly.

Mechanical robustness and seismic performance

Schneider Electric specifies for this structure a mechanical resistance with reinforcement subjected to 2G seismic tests in accordance with IEC 60068-2-57.

This feature is part of the verified mechanical performance of the structure and is relevant in installations where the switchboard's behavior under dynamic stress must be considered.

Complies with IEC 62208

The framework is specified in accordance with IEC 62208, relating to empty enclosures intended for low-voltage switchgear assemblies.

Compliance of the finished electrical switchboard will depend on the complete configuration, the installed components, the distribution system and the verifications corresponding to the final assembly.

Applications of the PrismaSeT P LVS08607 framework

The LVS08607 is suitable for building PrismaSeT P electrical switchboards in installations such as:

• Low-voltage main switchboards.
• Power distribution switchboards.
• Industrial installations.
• Commercial and tertiary buildings.
• Infrastructure and large buildings.
• HVAC and auxiliary services switchboards.
• Installations with side busbars.
• Multi-cell switchboards made up of several associated structures.
• IP30 or IP55 enclosure configurations.

Technical data for Schneider Electric LVS08607

• Manufacturer: Schneider Electric.
• Reference: LVS08607.
• EAN: 3606481879295.
• Range: PrismaSeT.
• Series: PrismaSeT P.
• Product type: framework / framework.
• Compatibility: PrismaSeT P cubicle.
• Width configuration: 650 + 150 mm.
• Total width: 800 mm.
• Height: 2000 mm.
• Depth: 600 mm.
• Weight: 34.36 kg.
• Surface finish: textured matte.
• Treatment: electrophoresis and hot-cured epoxy-polyester powder coating.
• Color: white RAL 9003.
• Side-by-side association: yes.
• Back-to-back association: yes.
• Busbar compartment position: left or right.
• Compatible with IP30 configurations: yes, with suitable panels.
• Compatible with IP55 configurations: yes, with suitable panels.
• Included components: two frames, four crosspieces, fixing elements and side-by-side association kit.
• Standard: IEC 62208.
• Seismic robustness: reinforced structure tested at 2G according to IEC 60068-2-57.
• Indicated country of origin: France.

Modular structure for high-capacity PrismaSeT P switchboards

The Schneider Electric LVS08607 provides the basic structure for building a PrismaSeT P cubicle measuring 2000 mm high, 800 mm wide and 600 mm deep. Its 650 + 150 mm configuration makes it possible to provide an additional area for busbars, which can be positioned on the left or right depending on the project requirements.

The possibility of combining multiple frameworks side by side or back to back makes it easier to build multi-column distribution switchboards, while compatibility with IP30 and IP55 panels allows the enclosure protection level to be adapted to the installation environment.

This reference corresponds to the structural framework. To complete the switchboard, the doors, panels, base plinths, supports, plates, busbar systems and other PrismaSeT P accessories required according to the electrical and mechanical design of the installation must be selected separately.