Steel Wall Cabinet with Blind Door Without Mounting Plate 800x800x300 PanelSeT CRN

The Schneider Electric PanelSeT CRN NSYCRN88300 wall-mounted enclosure is a compact steel enclosure designed to house and protect electrical equipment, control devices, and automation components in professional applications. It features nominal dimensions of 800 x 800 x 300 mm, a blind door, IP66 and IK10 protection, and a RAL 7035 grey finish. This reference is supplied without a mounting plate, allowing the appropriate plate and internal accessories to be selected later for each project.

Its metal construction provides high mechanical strength and protection against the ingress of dust and water. The reversible door offers an opening angle of up to 120°, while the 3 mm double-bar insert locking system ensures secure access to the inside of the enclosure. Thanks to its features, the PanelSeT CRN is a solution especially suited for electrical panels, automation installations, machine control, and power distribution.

800 x 800 x 300 mm steel wall-mounted enclosure

The NSYCRN88300 reference belongs to Schneider Electric's PanelSeT CRN family and features a monobloc format for wall mounting. Its dimensions provide ample internal volume for organizing electrical equipment and accessories while maintaining a compact installation.

• Nominal height: 800 mm.
• Nominal width: 800 mm.
• Nominal depth: 300 mm.
• Installation type: wall mounting.
• Enclosure type: monobloc.
• Number of doors: 1 front door.

IP66 protection against dust and water

The enclosure offers an IP66 protection rating according to IEC 60529. This classification provides complete protection against dust ingress and high resistance to powerful water jets, helping preserve the electrical components housed inside under the installation conditions specified by the manufacturer.

This high level of sealing is achieved through a construction in which the sides are made from a single folded section and the rear is welded with a double profile that forms a protected sealing zone.

IK10 mechanical resistance

In addition to its protection against dust and water, the PanelSeT CRN NSYCRN88300 has an IK10 impact resistance rating according to IEC 62262. This level of protection provides high resistance to mechanical impacts and helps protect the devices installed inside the panel.

The combination of IP66 and IK10 makes this enclosure especially suitable for technical installations where robust protection of electrical equipment is required.

Reversible blind door with 120° opening

The enclosure includes a blind steel front door, ideal when it is not necessary to view the installed devices without opening the enclosure. The door is reversible and allows opening up to 120°, facilitating access to the interior during assembly, wiring, inspection, and maintenance operations.

The door can be removed via its hinges, a feature that simplifies machining, installation, and maintenance tasks for the panel.

Double-bar locking for greater security

The locking system uses a 3 mm double-bar insert. Schneider Electric also highlights a three-point locking system for this enclosure format, designed to maintain uniform door closure and help preserve the enclosure's sealing performance.

This system also facilitates access by authorized personnel during maintenance or modification work on the installation.

Robust steel construction

The enclosure body is made of steel and features a surface finish with epoxy-polyester powder coating. This treatment provides a uniform finish and helps protect the metal surface during use.

• Body material: steel.
• Finish: epoxy-polyester powder coating.
• Color: RAL 7035 grey.
• Construction: sides made from a single folded section.
• Rear section: welded with double profile and protected sealing zone.

Mounting plate not included

The NSYCRN88300 reference is supplied without a mounting plate. This allows the enclosure interior to be configured with the plate, supports, and accessories suitable for the type of switchgear, automation equipment, or devices to be installed.

This feature should be taken into account when preparing the electrical panel, as the internal plate required to mount the components must be selected separately from the accessories compatible with the PanelSeT CRN.

Two bottom cable entry plates

The enclosure includes 2 standard cable entry plates located at the bottom. These plates are removable by screws and make it easier to prepare cable entries according to the specific needs of the installation.

The removable design of the plates allows machining to be carried out more conveniently and simplifies later interventions on conductor entry.

Designed to facilitate installation and maintenance

The PanelSeT CRN design is intended to make the installer's work easier. Both the removable door and the removable bottom cable entry plates allow convenient access to the different areas of the enclosure during panel assembly.

Front access and the door opening of up to 120° provide a wide working space for installing, wiring, and maintaining electrical components.

Technical characteristics of the Schneider Electric NSYCRN88300

• Brand: Schneider Electric.
• Reference: NSYCRN88300.
• Range: PanelSeT.
• Product: PanelSeT CRN.
• Type: compact wall-mounted enclosure.
• Application: multipurpose.
• Body material: steel.
• Height: 800 mm.
• Width: 800 mm.
• Depth: 300 mm.
• Door type: blind.
• Number of doors: 1 front.
• Door opening: reversible up to 120°.
• Lock type: 3 mm double-bar insert.
• Mounting plate: not included.
• Cable entry plates: 2 bottom.
• Cable entry plate type: standard and removable by screws.
• Protection rating: IP66 according to IEC 60529.
• Impact resistance: IK10 according to IEC 62262.
• Surface finish: epoxy-polyester powder coating.
• Color: RAL 7035 grey.
• Mounting: wall-mounted.
• Operating access: front.
• Net weight: approximately 29 kg.
• Standard: IEC 62208.
• Certifications: UL, cUL, and DNV-GL according to the manufacturer's technical documentation.
• GTIN: 3606480211737.

Applications of the PanelSeT CRN enclosure

The Schneider Electric NSYCRN88300 can be used to build electrical distribution, automation, and control panels in professional installations. Its generous internal space allows it to house switchgear, contactors, relays, power supplies, control devices, automation equipment, and other compatible components.

Its wall-mounted format makes it possible to take advantage of vertical surfaces in technical rooms, production areas, industrial facilities, and commercial buildings, while its high protection level helps preserve installed equipment in demanding environmental conditions.

A robust and configurable enclosure for electrical panels

The PanelSeT CRN 800 x 800 x 300 mm wall-mounted enclosure combines a robust steel structure with IP66 and IK10 protection, a reversible blind door, and bottom cable entries. As it is supplied without a mounting plate, it allows the internal equipment to be adapted to the specific needs of each panel.

The 120° opening, removable parts, and double-bar locking complete an enclosure designed to facilitate the installation and maintenance of electrical and automation equipment in professional applications.