Rear Panel for PrismaSeT P Box IP30 Width 800mm

The Schneider Electric PrismaSeT P LVS08748 rear panel is a metal closing element designed for PrismaSeT P electrical enclosures with 800 mm width and 2000 mm height. This reference is specifically the version prepared to achieve an IP55 protection rating in a correctly configured enclosure, and it includes a factory-fitted polyurethane gasket to help ensure rear sealing.

Made from treated steel sheet and finished in white RAL 9003, the panel features electrophoresis treatment and hot-cured epoxy-polyester powder coating. It is intended for low-voltage electrical distribution boards in the PrismaSeT P range and is also compatible with structures configured as 650 + 150 mm wide.

Key features of Schneider Electric LVS08748

• Brand: Schneider Electric.
• Range: PrismaSeT.
• Series: PrismaSeT P.
• Reference: LVS08748.
• Product type: rear panel for enclosure.
• Application: low-voltage electrical distribution.
• Compatibility: PrismaSeT P enclosures.
• Cabinet width: 800 mm.
• Compatible with configuration: 650 + 150 mm.
• Panel width: 800 mm.
• Height: 2000 mm.
• Material: treated steel sheet.
• Color: white RAL 9003.
• Finish: matte and textured.
• Surface treatment: electrophoresis and hot-cured epoxy-polyester powder coating.
• Enclosure protection rating: IP55.
• Impact resistance: IK10.
• Gasket: factory-fitted PUR polyurethane.
• Net weight: approximately 22.72 kg.
• Quantity: 1 unit.
• Standards: IEC 61439-1 and IEC 61439-2 for the enclosure.
• Certification: ASTA.

Rear panel for PrismaSeT P enclosures

The LVS08748 is designed to close the rear side of a Schneider Electric PrismaSeT P enclosure. It is part of the modular enclosure system used to build main and secondary electrical distribution boards.

The panel does not constitute a complete board by itself. It must be combined with the frame, door, roof, side panels, base plinths and other PrismaSeT P accessories required to obtain the final enclosure configuration.

IP55 protection rating

The LVS08748 reference corresponds to the variant intended for configurations with an IP55 protection rating. This level of protection allows the enclosure to be configured with protection against harmful dust ingress and water jets, provided that all cabinet components are IP55 compatible and correctly installed.

The final protection rating depends on the complete board assembly and not only on the rear panel. For this reason, doors, sides, roof, cable entries and other elements must be selected with the same protection level when the project requires maintaining IP55.

Factory-fitted polyurethane gasket

Schneider Electric equips this rear panel with a factory-installed PUR polyurethane gasket. Its function is to improve sealing between the panel and the cabinet structure and help maintain the IP55 protection characteristics of the complete enclosure.

The integrated gasket simplifies installation by avoiding the need to add a separate sealing element to the rear closure.

For 800 mm wide cabinets

The panel is designed for PrismaSeT P structures with a total width of 800 mm. Schneider Electric also specifies it for cabinets configured as 650 + 150 mm, where the total width remains 800 mm.

This configuration allows the panel to be used in columns with a 650 mm main section and an additional 150 mm compartment, common in boards with side busbars or other compartmentalization needs.

2000 mm height

The LVS08748 has a height of 2000 mm, so it is designed for PrismaSeT P frames of this nominal height.

• Width: 800 mm.
• Height: 2000 mm.
• Net weight: approximately 22.72 kg.

Before ordering, it is important to check both the width and height of the frame on which it will be installed.

Made from treated steel sheet

The panel is made from treated steel sheet, providing the mechanical rigidity needed to be part of a professional electrical distribution enclosure.

The steel receives a protective treatment designed to increase surface resistance and maintain performance throughout the service life of the board.

Electrophoresis and epoxy-polyester coating

Schneider Electric specifies an electrophoresis treatment followed by a layer of hot-cured epoxy-polyester powder coating.

This process provides a uniform finish and additional protection for the metal surface against the usual operating conditions of electrical boards.

White RAL 9003 finish

The panel features a white RAL 9003 finish, consistent with the exterior design of PrismaSeT P components.

The surface has a matte and textured finish, helping to ensure a homogeneous visual integration with doors, side panels and other elements in the same range.

IK10 mechanical resistance

The LVS08748 has an impact resistance rating of IK10. This level indicates high mechanical resistance of the panel against external impacts under the corresponding test conditions.

IK resistance is especially relevant in electrical boards installed in technical, industrial and commercial environments where the enclosure may be exposed to accidental mechanical stress.

Designed for low-voltage electrical distribution

Schneider Electric designs the panel for low-voltage electrical distribution enclosures. It is part of the PrismaSeT P architecture used to build distribution boards of different sizes and configurations.

Typical applications include:

• Main low-voltage switchboards.
• Secondary distribution boards.
• Industrial installations.
• Commercial buildings.
• Shopping centers.
• Infrastructure projects.
• HVAC and technical service boards.
• Installations requiring PrismaSeT P enclosures with IP55 protection.

Compatibility with the PrismaSeT P modular system

The PrismaSeT P range is based on a modular architecture that allows the structure, closing elements and internal equipment of the board to be selected separately.

The LVS08748 must be combined with compatible PrismaSeT P elements, including:

• 2000 mm high frames.
• Doors compatible with the required width and protection rating.
• Side panels.
• Roofs.
• Base plinths.
• Internal plates and supports.
• Busbar systems.
• Column coupling accessories.

Each component must be selected according to Schneider Electric compatibility tables to maintain the mechanical performance and IP rating of the finished board.

Compliance with IEC 61439

Schneider Electric specifies the IEC 61439-1 and IEC 61439-2 standards for this component, applicable to low-voltage switchgear assemblies and the enclosures used within these configurations.

Compliance of the finished board depends on the complete configuration, the installed equipment and the required checks for the final assembly.

ASTA certification

Schneider Electric’s technical data sheet lists ASTA certification for this product within its intended application in the PrismaSeT range.

Installation as a rear closure

The LVS08748 is installed at the rear of the compatible structure using the fixing systems provided by Schneider Electric.

To maintain IP55, it is essential to carry out the installation correctly, check the condition of the PUR gasket and use only components compatible with the cabinet’s IP55 configuration.

Technical data for Schneider Electric LVS08748

• Manufacturer: Schneider Electric.
• Reference: LVS08748.
• EAN: 3606481877826.
• Range: PrismaSeT.
• Series: PrismaSeT P.
• Type: rear panel.
• Application: enclosure for low-voltage electrical distribution.
• Enclosure type: metal cabinet.
• Compatibility: PrismaSeT P.
• Compatible width: 800 mm.
• Compatible configuration: 650 + 150 mm.
• Panel width: 800 mm.
• Height: 2000 mm.
• Material: treated steel sheet.
• Protective treatment: electrophoresis and hot-cured epoxy-polyester powder coating.
• Finish: matte and textured.
• Color: white RAL 9003.
• Gasket: factory-fitted PUR polyurethane.
• Enclosure protection rating: IP55.
• Impact resistance: IK10.
• Net weight: approximately 22.72 kg.
• Quantity per set: 1.
• Standards: IEC 61439-1 and IEC 61439-2.
• Certification: ASTA.

IP55 rear panel for 800 mm PrismaSeT P cabinets

The Schneider Electric LVS08748 completes the rear closure of a PrismaSeT P enclosure with 800 mm width and 2000 mm height. Its treated steel construction, RAL 9003 finish and integrated PUR gasket are designed to be part of boards with a final IP55 protection rating.

The IK10 resistance and electrophoresis plus epoxy-polyester surface treatment provide robustness to the assembly, while its compatibility with both 800 mm cabinets and 650 + 150 mm configurations makes it suitable for different PrismaSeT P architectures.

To maintain IP55 performance, the panel must be installed together with a structure, door, sides, roof and other Schneider Electric accessories compatible with the same protection rating.